Power Solutions

UPS 2U Pro

Reference UPS-2U-Pro

UniFi-managed 1.92kVA rackmount UPS with pure sine wave output, 8 individually controllable outlets with per-port power monitoring and remote power cycling, a hot-swappable 720Wh battery, and up to 22 minutes of runtime at half load 960W.

  • 32 kg (70.5 lb)Weight
  • Rack mount (2U)Form Factor
  • IP20Weatherproofing

UniFi-managed 1.92kVA rackmount UPS with pure sine wave output, 8 individually controllable outlets with per-port power monitoring and remote power cycling, a hot-swappable 720Wh battery, and up to 22 minutes of runtime at half load 960W. Supports Graceful Shutdown for UNVR and UNAS, and NUT compatibility for third-party devices.

Requires:

  • UniFi OS 5.1.25 or later
  • UniFi Network 10.5.67 or later
  • UniFi Mobile Android 10.39.3 or later
  • UniFi Mobile iOS 10.36.1 or later

Note. For Graceful Shutdown functionality, UniFi OS version 4.4.3 or higher is required.

Deployment

Topology

Technical drawings

What's in the box

Videos

UPS 2U Pro

Key features

1.92 kVA / 1920W Backup Power

Provides high-capacity battery backup for network and server equipment during power outages.

22-Minute Backup Runtime

Provides up to 22 minutes of runtime at half load for safe shutdown during outages.

Backup and Surge Outlets

Includes (8) NEMA 5-20R outlets with battery backup and surge protection.

Hot-Swappable Battery

Replace the battery without powering down connected devices.

Graceful Shutdown and NUT

Monitor power status and enable graceful shutdown for UNVR and UNAS with NUT support for third-party systems.

Specifications

UPS 2U Pro — Specifications
SpecificationValue
Mechanical
Dimensions442.4 x 87.4 x 630 mm (17.4 x 3.4 x 24.8")
Weight32 kg (70.5 lb)
Enclosure MaterialGalvanized steel
Form FactorRack mount (2U)
WeatherproofingIP20
Hardware
ManagementEthernet
Networking Interface(1) 100/10 MbE port for network connection (2) GbE ports for surge in/out
Power(1) OVC II AC in: NEMA 5-20P (8) Battery backup/surge protection: NEMA 5-20R (Outlets are individually resettable)
Capacity1920VA/1920W
TypeLine interactive
Input Voltage Range89–145V AC
Power Method(1) TN system, 120V AC, 16A Max., 50/60 Hz
Nominal Input Voltage120V AC
Output Voltage120V AC
Nominal Output Voltage120V AC
Frequency RangeAC mode: 50/60 Hz ±5 Hz (Auto sensing) Battery mode: 60 Hz ±1 Hz
AC Voltage Regulation±1.5% (Battery mode)
Transfer Time6 ms typical; 10 ms max. (Battery mode)
Wave FormPure sine wave (Battery mode)
Battery Type(1) Lead Acid 72V, 10Ah
RuntimeFull load: 9 min Half load: 22 min
Battery Charging Time8 hours recovery to 90% capacity
Overload at On-Line Mode103–120% 5 min go to fault 120–150% 10 sec go to fault 150% 1 sec go to fault
Overload at Battery Mode103–120% 1 min go to fault 120–150% 10 sec go to fault 150% 0.5 sec go to fault
Short Circuit Protection at On-Line ModeBreaker, 250V AC, 20A
Emergency Power Off (EPO)Yes
Display3.7” touchscreen
Buttons(1) Power (1) Factory reset (1) Circuit breaker
Hardware — LEDs
StatusOff: device not turned on Flashing white: initializing / factory default Steady white: waiting for adoption Steady blue: device adoption and working Flashing blue: battery mode Alternating white/blue: firmware upgrading Rapid flashing blue: locate Steady red: warning Flashing red: low battery
EthernetYes
Hardware
Operating Altitude3,000 m (1.9 mi)
Operating EnvironmentPollution Degree 2
Ambient Storage Temperature-15 to 50° C (5 to 122° F)
Ambient Operating Temperature0 to 40° C (32 to 104° F)
Ambient Operating Humidity0 to 95% noncondensing
NDAA CompliantYes
CertificationsFCC, IC, UL 1778, CSA C22.2 No. 107.3
Software — Application Requirements
Mobile AppsiOS™: Version 10.36.1 and later Android™: Version 10.39.3 and later
UniFi NetworkVersion 10.5.67 and later

Interested in this product?

Request a quote: our team will confirm availability, compatibility and a deployment plan.

✉
WhatsAppCall usRequest a quote