AI Enhancements

Protect Alarm Hub Kit

Reference UP-AlarmHub-Kit

32 input zone alarm control hub for hardwire intrusion sensors powered using PoE++ input and optional battery backup.

  • 2 AUX TerminalsAUX Terminals
  • 1 PoE PortPoE
  • 5 to 95% noncondensingAmbient Operating Humidity

Deployment

Topology

Technical drawings

What's in the box

Videos

Protect Alarm Hub Kit

Key features

32-Zone Alarm Inputs

Supports up to 32 wired intrusion zones with EOL resistor compatibility for scalable security deployments.

Battery Backup

Supports 12V SLA battery input and charging for uninterrupted operation during power outages.

(2) Output Relays

Two configurable relays for sirens, strobes, and other alarm system devices.

PoE++/+++ In RJ45 Port

Delivers power and data over a single cable, enabling streamlined installation without a separate power adapter.

Tamper Detection

Built-in tamper detection triggers alerts if the device is opened.

Specifications

Protect Alarm Hub Kit — Specifications
SpecificationValue
Key specifications
AUX Terminals2 AUX Terminals
PoE1 PoE Port
Overview
Dimensions379 x 355 x 105 mm (15 x 14 x 4.1")
Input Terminals(32) Alarm sensor (1) Emergency
Power MethodPoE++/PoE+++ 12V SLA battery
Power Output AvailabilityPoE+++ input: 68W PoE++ input: 42W (Max. combined power from PoE+ output, 12V aux power outputs, and 12V relay outputs)
NDAA CompliantYes
Mechanical
WeightDevice: 8.3 kg (18.3 lb) Mount: 624 g (1.4 lb)
Enclosure MaterialSGCC steel housing with polycarbonate cover
Mount MaterialSGCC steel
MountingWall
Hardware
Digital Input(32) Inputs for alarm sensor (Compatible with EOL resistors: 1–5.6kΩ, 1kΩ included) (1) Emergency (End-of-line (EOL) resistors enable the detection of wiring faults between the Alarm Hub and the sensor)
Output Relay(2) Wet/Dry Wet: 12V DC, 1A Dry: 30V DC, 1A
Aux Power OutputFor sensor: (3) 12V DC, 1A right side total, (3) 12V DC, 1A left side total
Indoor and Outdoor UseIndoor only
Ambient Operating Temperature-10 to 40° C (14 to 104° F)
Ambient Operating Humidity5 to 95% noncondensing
Networking Interface(1) 10/100 MbE RJ45 port
PoE Interface(1) PoE++/PoE+++ input, 54V DC, 60W/90W (1) PoE+ output, 54V DC, 30W
Max. Power Consumption90W
Battery ChargeSLA backup battery, 12V, 0.3A
LEDsW/B <a href="https://help.ui.com/hc/en-us/articles/25738084762775-UniFi-Access-Understand-Access-Device-LED-Status-Indicators" target="_blank" rel="noopener noreferrer">Learn More</a>
Buttons(1) Factory reset (2) Dry/Wet switch
CertificationsCE, FCC, IC
Software — Application Requirements
UniFi ProtectVersion 7.0.88 and later
Mobile AppUniFi Protect iOS™ version 3.3.0 and later UniFi Protect Android™ version 3.2.0 and later

Interested in this product?

Request a quote: our team will confirm availability, compatibility and a deployment plan.

✉
WhatsAppCall usRequest a quote