Access Starter Kits

Access G3 Elevator Starter Kit

Reference UA-G3-SK-Elevator

Connects to in-elevator readers with PoE to authorize floor selection. Supports up to 18 floors with digital inputs for elevator car status and emergency.

  • 6,000Maximum User Count
  • 537 g (1.2 lb)Weight
  • (4) 10/100/1000 Base-TNetworking Interface

Note. 10 free 1-year Touch Passes included. .

Deployment

Topology

Technical drawings

Videos

Access G3 Elevator Starter Kit

Specifications

Access G3 Elevator Starter Kit — Specifications
SpecificationValue
Overview
In the Box(1) Elevator Hub (1) G3 Reader (2) 2-wire PoE extenders (10) Access Cards
Touch Pass10 free 1-year Touch Passes included <a href="https://help.ui.com/hc/en-us/articles/27130425853079-UniFi-Access-Touch-Pass-Configuration" target="_blank" rel="noopener noreferrer">Learn More</a>
Elevator Hub
Dimensions129.3 x 244.7 x 33.6 mm (5.1 x 9.6 x 1.3")
Maximum User Count6,000
Power MethodPoE++ UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU
Weight537 g (1.2 lb)
Enclosure MaterialPolycarbonate
Mounting MaterialPolycarbonate
Networking Interface(4) 10/100/1000 Base-T
PoE Interface(1) PoE++ input, 50V DC, 1.2A (4) PoE+ outputs, 50V DC, 30W per port (Max 45W aggregated)
Management(1) 10/100/1000 Base-T
Max. Power Consumption7W (Without PoE output)
Digital Input(1) Emergency (1) Car position (5-bit) (1) Car status: Up/Down/Stop/Full (1) Door status: Open/Close
Outputs(18) Relays Rating 30V DC/2A
ESD/EMP ProtectionAir: ± 8kV, contact: ± 4kV
LEDsB/W <a href="https://help.ui.com/hc/en-us/articles/25738084762775-UniFi-Access-Understand-Access-Device-LED-Status-Indicators" target="_blank" rel="noopener noreferrer">Learn More</a>
Buttons(1) Factory reset Terminal blocks
Ambient Operating Temperature-10 to 40° C (14 to 104° F)
Ambient Operating Humidity5 to 95% noncondensing
NDAA CompliantYes
CertificationsCE, FCC, IC, UL 62368-1, CSA C22.2 No. 62368-1
Management ApplicationUniFi Access
Software InformationThe software version can be checked at <a href="https://unifi.ui.com/" target="_blank" rel="noopener noreferrer">https://unifi.ui.com</a>
G3 Reader
Dimensions93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4")
NFC Card & Keyfob AccessYes
Touch PassYes
Apple/Google WalletYes
Mobile UnlockYes
Handwave Request to ExitYes
WeatherproofingIP55
Weight82 g (2.9 oz)
Enclosure MaterialPolycarbonate, glass
Mount MaterialAluminum alloy
MountingIn-wall, gang box (Included) Junction box (Optional)
Indoor and Outdoor UseYes
Networking Interface(1) 10/100 MbE RJ45 port
ConnectivityBLE 4.1 NFC
Power MethodPoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU
Max. Power Consumption5W
Supported Voltage Range48V DC
ESD/EMP ProtectionAir: ± 15kV, contact: ± 8kV
SensorsProximity sensor
SpeakerYes ((1) 0.7W)
LEDsR/G/B/W <a href="https://help.ui.com/hc/en-us/articles/25738084762775-UniFi-Access-Understand-Access-Device-LED-Status-Indicators" target="_blank" rel="noopener noreferrer">Learn More</a>
Button(1) Factory reset
NFC Frequency13.56 MHz
NFC Read Range< 30 mm (1.18'')
NFC TechnologyISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340) MIFARE Classic / MIFARE DESFIRE Sony FeliCa™ (ID only) NFC Forum tags T1T, T2T, T3T, T4T and T5T ECP 2.0
PoE Cabling RequirementsCat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.
UL 294 LevelDestructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I
UL 294 StatementCompliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
CAN/ULC-60839-11-1 GradeGrade assignment: I
Ambient Operating Temperature-30 to 45° C (-22 to 113° F)
Ambient Operating Humidity5 to 90% noncondensing
NDAA CompliantYes
CertificationsCE, FCC, IC, SRRC, UL 294, CAN/ULC-60839-11-1
Management ApplicationUniFi Access
Software InformationThe software version can be checked at <a href="https://unifi.ui.com/" target="_blank" rel="noopener noreferrer">https://unifi.ui.com</a>
Access Card
Dimensions85.6 x 53.98 x 0.84 mm (3.37 x 2.13 x 0.03")
Weight5 g (0.18 oz)
FormatISO 7810 ID-1
NFC Frequency13.56 MHz
NFC TechnologyISO/IEC 14443 Type A MIFARE DESFire UniFi Access Proprietary Security Protocol
NDAA CompliantYes
Wire PoE Extenders
ModelUACC-Extender-2Wire-PoE-Tx/Rx
Dimensions40 x 105 x 25 mm (1.6 x 4.1 x 1")
WeightPoE in: 77 g (2.7 oz) PoE out: 79 g (2.8 oz)
Enclosure MaterialPolycarbonate
Mounting MaterialPolycarbonate
Networking Interface(1) 10/100 MbE (1) Homeplug AV
PoE InterfacePoE input: (1) PoE++, 50V DC, Max. 1.2A PoE output: (1) PoE+, 48V DC, 0.72A
Management(1) 10/100 MbE
Power MethodPoE++
Max. Power Consumption3W (Without PoE output)
ESD/EMP ProtectionAir: ± 8kV, contact: ± 4kV
Recommend Max. Cable Length<a href="https://store.ui.com/products/uacc-retrofit-poe-2wire#technical" target="_blank" rel="noopener noreferrer">Learn More</a>
LEDsWhite
Ambient Operating Temperature-10 to 40° C (14 to 104° F)
Ambient Operating Humidity5 to 95% noncondensing
NDAA CompliantYes
CertificationsCE, FCC, IC

Interested in this product?

Request a quote: our team will confirm availability, compatibility and a deployment plan.

✉
WhatsAppCall usRequest a quote