
Enterprise Switches
Switch Enterprise Campus 48S PoE
Reference ECS-48S-PoE (2150W)
Enterprise-grade 48-port, Layer 3 Etherlighting™ PoE+++ switch with Stacking support and high-capacity 10 GbE RJ45 and 25G SFP28 connections for high availability system design.
- 4 (25G/10G/1G)25G SFP28
- 1Console
- 680 GbpsSwitching Capacity
Note. Recommend being paired with Enterprise Campus Aggregation. Requires a 4-post rack, or a center-mount bracket or cantilever shelf on 2-post racks for optimal support.
Deployment


Topology

Technical drawings


What's in the box

Videos
Switch Enterprise Campus 48S PoE
Key features
Switch Stacking
Eliminate single points of failure through resilient switch Stacking. Utilize Cross-Stack LAGs to reduce cabling complexity while maintaining redundant links to connected devices.
(48) Multi-Speed PoE+++ Ports
High-density 10 GbE and 2.5 GbE PoE+++ RJ45 ports deliver high-power output and connectivity for demanding devices.
25G Uplink Connectivity
(4) SFP28 high-bandwidth uplink ports ensure seamless aggregation to distribution or core layers.
Redundant Power & Cooling Design
Designed for mission-critical environments with redundant, hot-swappable power supplies and fans for intelligent thermal management.
Enterprise-Grade Reliability
Engineered for mission-critical deployments with robust switching performance and intelligent thermal management.
Specifications
| Specification | Value |
|---|---|
| Overview | |
| Dimensions | 442.4 x 44 x 496 mm (17.4 x 1.7 x 19.5") |
| Overview — Port Layout | |
| 1 GbE RJ45 | 1 (1G/100M/10M) (OOB Management port only) |
| 2.5 GbE RJ45 | 32 (All PoE+++) (2.5G/1G/100M/10M) (10/100M half-duplex not supported) |
| 10 GbE RJ45 | 16 (All PoE+++) (10G/5G/2.5G/1G/100M/10M) (10/100M half-duplex not supported) |
| 25G SFP28 | 4 (25G/10G/1G) |
| 100G QSFP28 | 2 (100G) (Stacking port only, does not support uplink. Breakout cables are not supported) |
| Console | 1 |
| Overview | |
| Max. PoE Output | Up to PoE+++ |
| Total PoE Availability | 200-240V AC Shared Mode: 2,150W 100-120V AC Shared Mode: 1,750W 200-240V AC Redundant Mode: 950W 100-120V AC Redundant Mode: 750W |
| Redundancy | Switch Stacking (2) Hot-Swappable PSUs (4) Hot-Swappable Fans |
| Layer 3 | Yes |
| Form Factor | Rack Mount (1U, Full-Depth) (Requires a 4-post rack, or a center-mount bracket or cantilever shelf on 2-post racks for optimal support) |
| Etherlighting™ | Yes |
| Performance | |
| Switching Capacity | 680 Gbps |
| Total Non-Blocking Throughput | 340 Gbps |
| Forwarding Rate | 506 Mpps |
| Supported VLANs | 1,000 |
| MAC Address Table Size | 32,000 |
| IPv4 Static Routes | 512 |
| Packet Buffer Size | 8 MB |
| Performance — Access Lists | |
| IPv4 | 256 |
| MAC | 256 |
| Layer 3 Features | |
| DHCP Server (Local Networks) | Yes |
| DHCP Relay | Yes |
| Inter-VLAN Routing (Local Networks) | Yes |
| Static Routing (Local Networks) | Yes |
| Layer 2 Features | |
| LACP Port Aggregation | Yes |
| Stacking | Yes (Up to 4 switches per stack and only switches with the same port count) |
| Cross-Stack LAG | Yes (An aggregated link spanning switches in the stack. Up to 8 ports per LAG) |
| STP & RSTP | Yes |
| QoS (DSCP) | Yes |
| Pro AV Profiles (Play, Dante, Q-SYS, NDI, SDVoE, Shure, AES67, Crestron) | Yes |
| Advanced IGMP Configuration (Querier, Fast Leave, Router Port) | Yes |
| IGMP Snooping | Yes |
| 802.1X Control | Yes |
| MAC-Based ACLs & Device Isolation | Yes |
| DHCP Snooping & Guarding | Yes |
| Egress Rate Limit | Yes |
| Flow Control | Yes |
| Storm Control | Yes |
| Multicast & Broadcast Rate Limiting | Yes |
| MAC Address Blocking | Yes |
| IP-Based ACLs & Network Isolation | Yes |
| MAC-Based Port Restriction | Yes |
| Port Isolation | Yes |
| Port Mirroring | Yes |
| Jumbo Frames | Yes |
| LLDP-MED | Yes |
| Voice VLAN | Yes |
| Loop Protection | Yes |
| Virtual Network Override | Yes |
| Hardware — PoE Ports | |
| PoE+++ | 48 |
| Hardware — Max. PoE Wattage per Port by PSE | |
| PoE | 15.4W |
| PoE+ | 30W |
| PoE++ | 60W |
| PoE+++ | 90W (802.3bt Type 4, Class 8) |
| Hardware | |
| Max. Power Consumption | 250W (Excluding PoE Output) 2,400W (Including PoE Output) |
| Power Method | (2) Universal input, 100–240V AC, 50/60 Hz |
| Power Input Method | (2) AC input, Hot-swappable power modules |
| Power Supply | (2) Hot-swappable AC/DC 1,200W power modules |
| Supported Voltage Range | 100–240V AC |
| Management | Ethernet OOB Management port Serial Console AR |
| Heat Dissipation | 853 BTU/hr (Excluding PoE Output) |
| Weight | Without mounting brackets: 9.5 kg (20.9 lb) With mounting brackets: 9.6 kg (21.1 lb) |
| Enclosure Material | SGCC steel |
| Mount Material | SGCC steel |
| Supported Rack Depth | 482.6 mm (19") four-post racks Posts depths ranging from 650 to 1,000 mm (25.6–39.4”) |
| LCM Display | 1.3" touchscreen |
| Fan Method | (4) Hot-swappable fan modules (Fan modules operate with 3 + 1 redundancy) |
| ESD Protection | Air: ± 30kV, contact: ± 19kV |
| Ambient Operating Temperature | -5 to 40° C (23 to 104° F) |
| Ambient Operating Humidity | 10 to 90% noncondensing |
| Hardware — Etherlighting™ | |
| Ethernet | Yes |
| SFP28 | Yes |
| Hardware — LEDs | |
| Ethernet | Yes |
| SFP28 | Yes |
| System | Yes |
| Hardware | |
| NDAA Compliant | Yes |
| Certifications | CE, FCC, IC |
| Software — Application Requirements | |
| UniFi Network | Version 10.6.101 and later |
Interested in this product?
Request a quote: our team will confirm availability, compatibility and a deployment plan.



